This is a serial interface E-Ink display module, 4.3 inch, 800×600 resolution, with embedded font libraries, ultra low power consumption.
You don't have to know anything about the complex underlying details of e-Paper, nor the specific algorithms of displaying graphics, texts, and images. All it needs is the serial interface, and all it matters is your creativity.
- Easy to use, only one serial port can complete the display function, including drawing geometry and displaying text and pictures.
- Embedded font libraries, supports 32, 48 and 64 dot matrix GBK Chinese fonts and English fonts.
- Built-in 128MB NandFlash, allows the font/image data to be stored in either an external TF card or the internal NandFlash.
- Innovative eye protector, 4 grey level displaying, 800×600 resolution.
- Adjustable serial interface baud rate, 115200 by default when power up.
- Powered from 3.3V to 5V, compatible with logic level.
- Ultra low power consumption, sleeping current lower than 5mA.
- Comes with host computer software, control it directly on your computer.
- VCC : 3.3V~5.5V
- GND : GND
- DOUT : Serial data out
- DIN : Serial data in
- WAKE_UP : External wake up
- RST : External reset
- Shopping mall POS
- Price label
- Industry instrument
Limited by the hardware processing, it usually takes 1.5s to refresh each single frame image, therefore, this e-Paper is NOT capable of playing animations.
1 * 4.3 inch e-Paper UART Module
1 * XH2.54 6-pin cable