Material: Tungsten steel(cutter blade), aluminum(holder)
Length of Blades Holder: 45 mm(1.7 inches)
Length of Blades: 23 mm(0.9 inch)
Diameter of Blades: 2mm
Degree of Blade: 30 ° / 45 ° / 60 °
Type: Lettering, Cutting
DIY Supplies: Polishing Wood, PVC, Mahogany Color, Precision, MDF and other Relief.
Compatible with: Roland and most domestic and imported plotters
Package Weight: 63g / 2.22oz
30° blades are predominantly used for cuting very thin window tint and mylar materials.
45° blades are the standard blade that applies to most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus.
60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
Plotter Blade Cutting Strip Specification:
Suitable for:Suitable for all 8 mm head cutting plotter
Plotter layering LIYU 8mm tape layering pads blades do not hurt head
1. Blade should not extend too long, generally within half a millimeter is better. Pay proper attention to extend blade longer when carve the small print to avoid the blade holder taking the carved strokes away.
Suitably slow down to engrave small print with new cutter.
2. When the word is carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon still exists after changing the blade, it must be the holder problem.
3. When problem arises from the blade holder, try dropping oil to the bearing and rotate the blade several times to lubricate, if this is still not working, you may consider to replace the blade holder.
1 x Blade holder
5 x 30° Cutter Blade
5 x 45° Cutter Blade
5x 60° Cutter Blade
1 roll x plotter cutter strip