Material: Aluminum Alloy Blade Holder and Carbide Blades
Length of Blades Holder: 51.8 mm(2.04 inches)
Length of Blades: 19 mm(0.78 inch)
Diameter of Blades: 0.9mm
Degree of Blade: 30 ° / 45 ° / 60 °
Type: Lettering, Cutting
DIY Supplies: Polishing Wood, PVC, Mahogany Color, Precision, MDF and other Relief.
Compatible with: Graphtec CB09U CB09
Package Weight: 63g / 2.22oz
30° Blades (Blue cap) are mainly used for cuting very thin window tint and mylar materials.
45° Blades (Red cap) are the standard blades that work for most vinyl cutters. They are recommended for all standards cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus.
60° Blades (Yellow cap) for Cutting very small font & intricate line-art logos. Such as reflective films, flock and twill materials and also sand-blast resist.
Plotter Blade Cutting Strip Specification:
Suitable for:Suitable for all 8 mm head cutting plotter
Plotter layering LIYU 8mm tape layering pads blades do not hurt head
1. Blade should not extend too long, generally within half a millimeter is better. To avoid the blade holder take the carved strokes away, please pay enough attention to extend blade longer properly when carve the small print.
Slow down suitably if you want to change the small engraved print with new cutter.
2. If the word is carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the problem of holder.
3. When problem arises, drop oil to the bearing of the blade holder and rotate the blade several times to lubricate it , if still unresolved, please consider to replace the blade holder.
1 x Blade holder
5 x 30° Cutter Blade
5 x 45° Cutter Blade
5x 60°Cutter Blade
1 roll x plotter cutter strip