WitBot SKR V1.3 Control Board 32-Bit CPU Equipped with Open Source Firmware Marlin2.0 and Smoothieware and Use Gold Deposition Technology Support TMC2130 TMC2208 DRV8825 A4988 Driver for 3D Printer.


WitBot SKR V1.3 Control Board 32-Bit CPU Equipped with Open Source Firmware Marlin2.0 and Smoothieware and Use Gold Deposition Technology Support TMC2130 TMC2208 DRV8825 A4988 Driver for 3D Printer. by Witbot at TPC International. MPN: 2. Hurry! Limited time offer. Offer valid only while supplies last. 1.Supported hot bed power increased to 144W,The power of the hot bed connected to the motherboard must be less than or equal to 144W (ie, the thermal bed resistance is greater than 1Ω), if a high-power hot bed is used, the external hot-bed power expansion board must be connected.SKR motherboard power: After the SKR main board is powered on, the red light of the D4 in the lower left corner will light up, indicating that the power supply is normal; the 5V SEL in the middle of the board is the


Images:
WitBot SKR V1.3 Control Board 32-Bit CPU Equipped with Open Source Firmware Marlin2.0 and Smoothieware and Use Gold Deposition Technology Support TMC2130 TMC2208 DRV8825 A4988 Driver for 3D Printer. by Witbot (Image #1)
WitBot SKR V1.3 Control Board 32-Bit CPU Equipped with Open Source Firmware Marlin2.0 and Smoothieware and Use Gold Deposition Technology Support TMC2130 TMC2208 DRV8825 A4988 Driver for 3D Printer. by Witbot (Image #2)
WitBot SKR V1.3 Control Board 32-Bit CPU Equipped with Open Source Firmware Marlin2.0 and Smoothieware and Use Gold Deposition Technology Support TMC2130 TMC2208 DRV8825 A4988 Driver for 3D Printer. by Witbot (Image #3)
WitBot SKR V1.3 Control Board 32-Bit CPU Equipped with Open Source Firmware Marlin2.0 and Smoothieware and Use Gold Deposition Technology Support TMC2130 TMC2208 DRV8825 A4988 Driver for 3D Printer. by Witbot (Image #4)
WitBot SKR V1.3 Control Board 32-Bit CPU Equipped with Open Source Firmware Marlin2.0 and Smoothieware and Use Gold Deposition Technology Support TMC2130 TMC2208 DRV8825 A4988 Driver for 3D Printer. by Witbot (Image #5)
WitBot SKR V1.3 Control Board 32-Bit CPU Equipped with Open Source Firmware Marlin2.0 and Smoothieware and Use Gold Deposition Technology Support TMC2130 TMC2208 DRV8825 A4988 Driver for 3D Printer. by Witbot (Image #6)
4.6 out of 5 stars with 55 reviews
Condition: New
Availability: In Stock
$22.99


Quantity:  

 


View More In Printer Control Cards.

Product Description & Reviews

1.Supported hot bed power increased to 144W,The power of the hot bed connected to the motherboard must be less than or equal to 144W (ie, the thermal bed resistance is greater than 1Ω), if a high-power hot bed is used, the external hot-bed power expansion board must be connected.SKR motherboard power: After the SKR main board is powered on, the red light of the D4 in the lower left corner will light up, indicating that the power supply is normal; the 5V SEL in the middle of the board is the power selection end; 1)When using USB to power the motherboard, connect the +5V and USB pins with a shorting cap. 2)When using 12V-24V power supply, connect the +5V and INT pins with the shorting cap; NOTE:It can be connected to [12V-24V power supply] and [USB] at the same time. The printing process must use the shorting cap to connect the +5V and INT pins. SKR motherboard communicates with computer: The SKR motherboard communicates with the computer through the [USB] interface. After the driver is installed, the motherboard is inserted into the computer to recognize the port for data transmission. It is easy to see that the computer does not recognize the USB port without installing the driver. 1.smoothieware-usb-driver-v1.1 driver installation (Windows systems only) The driver can be obtained from our open source network;(Contact us to get the link) Note:When using smoothieware open source firmware, since only Windows system drivers, the SKR board at this time can only be recognized by the Windows system port! ! ! 2.If you are using Marlin2.0 firmware, follow the tutorial to install;(Contact us to get the link) NOTE:If you need more methods and materials, as well as how to change the firmware and get the firmware, please contact us.

Features & Highlights

  • SKR V1.3 motherboard uses 32-bit main frequency 100MHz ARM-class Cortex-M3 series LPC1768 master chip.Four-Layer Circuit Board,Gold deposition technology,and obtain CE certification.
  • Equipped with highly modular and open source firmware Marlin2.0 and Smoothieware, it is convenient for users to DIY and secondary development, and can avoid worries of not mastering the core code.
  • Support SPI working mode of TMC2130 driver, self-contained material detection function; TMC2130SPI, without using additional limit switch, can realize the function of limit switch by modifying Marin firmware.
  • Reserved extended port SERVOS of PWM signal to support BL Touch;Support 2.8-inch and 3.5-inch color touch screens, support 2004 LCD and 12864 LCD.
  • Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions.

Additional Information

Brand:
Witbot
Manufacturer:
WitBot
Category:
Printer Control Cards
MPN:
2
UPC:
791280795785
Part Number:
2
Publisher:
WitBot
Package Weight:
0.4 pounds
Package Size:
4.8 x 0.8 x 5.1 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


HQRP AC Adapter for HP Officejet 100 Mobile Printer L411 L411a L 411 411a Cn551ab1h Cn551a#b1h ; 65 Watt Charger Power Supply Cord Plus HQRP Coaster
By HQRP
mpn: 88777470906133,

HKY 24V Power AC DC Adapter for Canon SELPHY CP1300 CP1200 CP910 CA-CP200 CP400 CP720 CP760 CP800 CP900 Wireless Compact Portable Photo Printer Power Supply Cord Charger
By HUI KE YUAN
mpn: TFDirect, ean: 0709445227408,

HP CF389-60002 Formatter (main logic) PC board assembly - Use with the M452dn printer series only
By HP
mpn: CF389-60002,

RM2-6774 Registraion Assy - LJ Ent M607 / M608 / M609 / M631 / M632 / M633 series
By Laser Xperts Inc
mpn: RM2-6774-000CN, ean: 0768855215788,



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - tpcint.org. All Rights Reserved.