Zamtac 3D Printer Motherboard Megatronics V3 Control Board with Welding AD597 Chip USB 2.0 Full Speed Compatible by GIMAX at TPC International. MPN: GMX-D41D8CD98F00B204E9800998ECF8427E. Hurry! Limited time offer. Offer valid only while supplies last. 3D Printer Motherboard Megatronics V3 Control Board With Welding AD597 ChipDescription1. Megatronics has a powerful Atmega2560 processor with 256 kB
Product Description & Reviews
3D Printer Motherboard Megatronics V3 Control Board With Welding AD597 Chip
1. Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz.
2. The board can be connected to a PC using a normal USB cable.
3. It will register as FTDI FT232R device.
4. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.
5. With AD597 chip, suitable for thermocouple temperature measurement.
6. The Megatronics V3.0 motherboard has been soldered to the KF2510 terminal.
7. Board dimensions : Length: approx. 109.5mm/4.31'' Width: approx. 90.5mm/3.56'' Height: approx. 18mm/0.7''
1. Thermo couple (2x) On board support for connecting two thermo couples
2. Autonomous printing from Micro SD card on board, also an external SD card is supported
3. LCD display bracket, which is easy to hook up.The Wiring is compatible with most LCD screens.
4. Six MOSFETs: The board has 3pcs MOSFETs (3x 25A) to support extruders, 2pcs MOSFETs fior fans and 1pcs MOSFET (IRLS3034PBF) for the heated bed
5. Four thermistors are supported.
6. Up to 6 stepper drivers.
7. Compatible with RAMPS, 6 slots for stepper drivers (not included). Modularized to make replacement easy for damaged drivers. This board also support the new DRV8825 driver.
8. It can be easily extended with LCD, keypad etc.
1. USB 2.0 Full Speed compatible
2. Auto reset can be disabled by removing a jumper
3. The board can be powered from 12V1 (12V MAX), by setting a jumper
4. The LCD contrast can be adjusted with a trimpot
5. The 5V line is protected by a 500mA resettable fuse
7. Each stepper driver slot has a breakout to connect external stepper drivers to the board.
8. Four layer high quality PCB board
Note: This is only the board. Stepper drivers are not included.
Please allow 1-3mm
Features & Highlights
- 1. Thermo couple (2x) On board support for connecting two thermo couples
- 2. Autonomous printing from Micro SD card on board, also an external SD card is supported
- 3. LCD display bracket, which is easy to hook up.The Wiring is compatible with most LCD screens.
- 4. Six MOSFETs: The board has 3pcs MOSFETs (3x 25A) to support extruders, 2pcs MOSFETs fior fans and 1pcs MOSFET (IRLS3034PBF) for the heated bed
- 5. Four thermistors are supported.
Printer Control Cards
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by GIMAX, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: GMX-D41D8CD98F00B204E9800998ECF8427E, ean: 0670062899173,
1pc 3D Printer Parts JZ-TS28 2.8inch Full Color Touch Screen Board Compatible With Ramps1.4 MKS Board Packing List: 2.8inch touch screen * 1pc screen touching pen * 1pc cable * 1set Features: 1. Power off: after printing completed, nozz...
mpn: 6WT1V, ean: 0717580638829,
Genuine Power Supply Circuit Card Board EDPS-1BF A For Laser Printer B5460 B5465 B5465DNF & MS812de 6WT1V 06WT1V By EbidDealz Brand: EbidDealz Part Number: 6WT1V MPN: 06WT1V, CN-06WT1V Type: Power Supply Circuit Model: EDPS-1BF A Compatible Model: D...
Collect all the functions on one board, which solves the problem that the Ramps1.4 combination interface is cumbersome and easy to malfunction.Using 4982 as the motor drive, and the performance of the 4988 is equivalent, but the SOP package, the heat...
3D Printer Smoothieboard 5X V1.0 ARM Open Source Board Motherboard Mainboard Engraving Machine Controller BoardDescriptions:1. Smoothieboard is an open source hardware CNC controller designed by the Smoothie community to run Smoothieware firmware.2. ...