Zamtac 3D Printer Parts Controller Board Megatronics V3 Open-Source Firmware Version Integrates Marin AD597 for 3D DIY Motherboard Part - (Size: with AD597)
Zamtac 3D Printer Parts Controller Board Megatronics V3 Open-Source Firmware Version Integrates Marin AD597 for 3D DIY Motherboard Part - (Size: with AD597) by GIMAX at TPC International. MPN: GMX-356D322481FEA884710A849B6DB8FC97. Hurry! Limited time offer. Offer valid only while supplies last. DescriptionMegatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal
Product Description & Reviews
Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.
This is only the board. Stepper drivers are not included.
Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz
Thermo couple (2x)
On board support for connecting two thermo couples
Autonomous printing from Micro SD card on board, also an external SD card is supported
Hooking up a LCD is pretty easy. The Wiring is compatible with most LCD screens. We do not sell the required wiring yet, but you can use 6x2-wire cable.
The board has 3 MOSFETs (3x 25A) to support extruders, 2 MOSFETs fior fans and 1 MOSFET (IRLS3034PBF) for the heated bed
Four thermistors are supported.
Up to 6 stepper drivers
Compatible with RAMPS, 6 slots for stepper drivers (not included). Modularized to make replacement easy for damaged drivers. This board also support the new DRV8825 driver from Pololu http://www.pololu.com/catalog/product/2132.
Support for many peripherals
The board's functions can be easily extended with LCD, keypad etc. See the connectors section for more information
USB 2.0 Full Speed compatible
Auto reset can be disabled by removing a jumper
The board can be powered from 12V1 (12V MAX), by setting a jumper
The LCD contrast can be adjusted with a trimpot
The 5V line is protected by a 500mA resettable fuse
Each stepper driver slot has a breakout to connect external stepper drivers to the board.
Four layer high quality PCB board
Send data line
1. Set the Ramps, Arduino, Ramps SD an
Features & Highlights
- Size: With AD597
- Item type: Motherboard
- Model number: megatronics v3
Printer Control Cards
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by GIMAX, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: GMX-50ADF8D4F435A43E7EC806BE4D47B758, ean: 0760274964186,
Features:Uses as powerful hardware as possible at the time.Can control several machine types ( 3D printers, lasers, CNC mills/routers ).Easy to setup and use.Easy to do weird, new and exciting things with.Easy to deve...
mpn: GMX-F6338708E0C07A62F09B0BA2FF6DAD76, ean: 0760274944843,
Ethernet:The Ethernet interface allows you to connect your card to your local network (LAN).You can then communicate with the board using different protocols:HTTP uses the web interface hosted on the card or uses host software that supports this feat...
mpn: GMX-AEEF869F06F66FF4D6AFA586F207336B, ean: 0670062904907,
JZ-TS35 3.5inch Full Color TouchScreen Display Board for Ramps&MKS GEN L 3D Printer ï¼ JHDescriptions: Features:1. Power off: after printing completed, nozzle cooling down, shut down automatically(with expansion module).2. Speed optimization: smoo...
mpn: GMX-D41D8CD98F00B204E9800998ECF8427E, ean: 0670062976454,
3D Printer Motherboard Megatronics V3 Control Board With Welding AD597 Chip Specifications:Name: MegatronicsV3Weight:105gThis is only the board. Stepper drivers are not included.Major featuresAtmega2560Powerful Atmega2560 processor with 256 kB memor...