Zamtac 3D Printer Parts Controller Board Megatronics V3 Open-Source Firmware Version Integrates Marin AD597 for 3D DIY Motherboard Part - (Size: Without AD597) by GIMAX at TPC International. MPN: GMX-1B5D944FD0315D75AC3B26C3E371C8B1. Hurry! Limited time offer. Offer valid only while supplies last. DescriptionMegatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal
Product Description & Reviews
Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.
This is only the board. Stepper drivers are not included.
Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz
Thermo couple (2x)
On board support for connecting two thermo couples
Autonomous printing from Micro SD card on board, also an external SD card is supported
Hooking up a LCD is pretty easy. The Wiring is compatible with most LCD screens. We do not sell the required wiring yet, but you can use 6x2-wire cable.
The board has 3 MOSFETs (3x 25A) to support extruders, 2 MOSFETs fior fans and 1 MOSFET (IRLS3034PBF) for the heated bed
Four thermistors are supported.
Up to 6 stepper drivers
Compatible with RAMPS, 6 slots for stepper drivers (not included). Modularized to make replacement easy for damaged drivers. This board also support the new DRV8825 driver from Pololu http://www.pololu.com/catalog/product/2132.
Support for many peripherals
The board's functions can be easily extended with LCD, keypad etc. See the connectors section for more information
USB 2.0 Full Speed compatible
Auto reset can be disabled by removing a jumper
The board can be powered from 12V1 (12V MAX), by setting a jumper
The LCD contrast can be adjusted with a trimpot
The 5V line is protected by a 500mA resettable fuse
Each stepper driver slot has a breakout to connect external stepper drivers to the board.
Four layer high quality PCB board
Send data line
1. Set the Ramps, Arduino, Ramps SD an
Features & Highlights
- Size: Without AD597
- Item type: Motherboard
- Model number: megatronics v3
Printer Control Cards
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by GIMAX, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By Laser Xperts Inc
mpn: RM2-1259-000CN, ean: 0768855217256,
Control Panel - Duplex - NEW - LJ Ent M607 / M608 / M609 / M652 / M653 / E60055 / E60065 / E60075 series...
mpn: V5-XBCG-Z742, ean: 7010473211592,
REFIT CZ172-60001 formatter board for Jet M126A M126 M125A M125 Mainboard/ Formatter Board...
mpn: 41X0838, ean: 0754970614445,
Ipds Card MS510dn MS517dn MS610dn MS610dtn MS617dn...
Phrozen Shuffle is the next generation LCD 3D printer. In SLA system, light intensity, wavelength, and optical path highly influences printing quality and efficiency. Conventional LCD 3D printer tends to use thumb-size COB LED with Fresnel film. It i...